Mane·Lens

← Blog  ·  7 min read  ·  Product Analysis

Sulphates and your scalp

The irritation research behind the sulphate panic is real and well conducted. It also tested an exposure that has almost nothing in common with washing your hair.

Sulphate free is one of the biggest claims in haircare, and unlike a lot of claims it did not come from nowhere. There is real irritation research behind it, published in proper dermatology journals, and it does show sodium lauryl sulphate doing measurable damage to skin.

The catch is what that research actually tested, which has very little in common with washing your hair.

What a surfactant is doing on your scalp

Surfactants have a water-loving end and an oil-loving end, which lets them surround oil and lift it into water so it rinses away. That is the whole job. Sebum, dead skin cells, pollution particles and the residue of your own styling products all need removing, and they do not all come off the same way.

A shampoo is not one cleanser. A typical formula runs at least 10% total surfactant, often 12 to 16% of a primary anionic cleanser like sodium laureth sulphate, with a secondary amphoteric surfactant such as cocamidopropyl betaine at around 1 to 4%. That secondary surfactant is in there specifically to soften the primary one.

SLS and SLES are not the same molecule

This gets flattened constantly, and the difference is the whole story.

Sodium lauryl sulphate and sodium laureth sulphate differ by ethoxylation. SLES has ethylene oxide units added, which makes the water-loving end bulkier and changes how the molecule interacts with skin proteins. That single structural difference is why they behave so differently in testing, and why a label that says only 'contains sulphates' is telling you almost nothing.

The patch test data, and what it tested

The key study is Löffler and colleagues in Contact Dermatitis, which patch tested SLS and SLES against each other at 0.125, 0.25, 0.5, 1.0 and 2.0%, across exposures of 6, 12 and 24 hours, measuring transepidermal water loss and laser Doppler flowmetry at 24 hours, 7 days and 10 days after the patch came off.

The result was not subtle. SLS produced a pronounced reaction and SLES a far milder one. More striking, during the regeneration period SLS still showed increased water loss at day 10, at every concentration tested. Ten days after a single exposure, the barrier had not fully recovered.

What the patch test did: Concentrations of 0.125% to 2.0%, held against skin under occlusion for 6, 12 or 24 hours, on an unwashed test site chosen to provoke a reaction. SLS raised transepidermal water loss for at least 10 days afterwards at all concentrations tested.

Why that is not your shampoo

Read those conditions again and the gap becomes obvious. A patch test holds a dilute surfactant solution against skin under an occlusive patch for hours, which is designed to provoke and measure a reaction. It is a deliberately harsh model, and that is the point of it.

Washing your hair is a different exposure in almost every respect. The contact is around 60 seconds, not 24 hours. It is diluted heavily with water at the point of use. It is rinsed off rather than sealed in. It arrives alongside secondary surfactants and conditioning agents that are formulated to reduce exactly this effect. And it lands on a scalp with hair on it, not on a bare forearm.

So the fear is overstated. A concentration and duration chosen to cause irritation causes irritation, and that does not establish what a 60-second rinse-off does.

It cuts the other way too, and this part usually gets left out by people defending sulphates. The study shows SLS is genuinely capable of barrier damage that persists for over a week. If your barrier is already compromised, if you have eczema or dermatitis, or if you are washing frequently, that capability is not irrelevant just because the model was harsh.

What 'harsh' means in a laboratory

There is a second measurement worth knowing about, because it explains the mechanism rather than just the outcome.

The zein test measures how much of a protein a surfactant solution can dissolve, as a proxy for how aggressively it interacts with the proteins in skin and hair. Sodium lauryl sulphate returns a very high zein solubility value. Milder surfactants return little or none. SLS denatures proteins, which is why it shows up as damaging across several unrelated assays rather than just one.

That is a real property of the molecule. It is also dose-dependent and formulation-dependent, which is why the same molecule can be a problem in one product and unremarkable in another.

Who should actually pay attention

Most people can use a well-formulated sulphate shampoo without any issue. The people for whom this genuinely matters are narrower than the marketing suggests:

If none of those describe you and your shampoo cleans comfortably, there is no scientific reason to avoid it because of one word on the ingredient list.

What sulphate free actually swaps in

Removing a sulphate does not automatically make a formula milder, and it does not guarantee it cleans well enough for your routine.

Some sulphate-free systems clean poorly against heavy butters, oils and silicones. That produces its own problem: residue accumulates, hair feels coated, and many of us respond by washing more often or manipulating more during the wash, which is a bigger source of mechanical damage than the surfactant ever was.

It is also worth knowing where the regulator stands. Commission guidance on Regulation (EU) 655/2013 says 'free from' claims about legally authorised ingredients breach the fairness criterion, because they denigrate ingredients that have been assessed as safe. Sulphate free is useful as a description of what a formula is built on. It is not a safety statement.

The third arm of that study

The Löffler paper is usually quoted as SLS against SLES, but it tested a third detergent: alkyl polyglucoside. That class is where a lot of the better sulphate-free formulas have gone, and it is worth knowing that the comparison was made directly rather than assumed.

Sugar-derived surfactants like the glucosides, along with sodium cocoyl isethionate and the sulfosuccinates, are the realistic alternatives. They are genuinely milder on the barrier. They also generally clean less aggressively, which is fine if your routine is light and a problem if it is not.

Where co-washing fits

Co-washing replaces shampoo with a conditioning cleanser, and for very dry or tightly coiled hair it can make wash day considerably easier on the fibre.

The thing to watch is that a conditioning cleanser is not removing much sebum, and sebum is what the Malassezia yeasts on your scalp feed on. If you co-wash exclusively and you are prone to flaking or itch, you are leaving the substrate in place. Co-washing between proper cleanses works better for most people than co-washing instead of them.

What to actually do

The honest summary is that sulphates are a real variable with real evidence attached, sitting a long way down the list of things that decide whether your hair and scalp are comfortable.

When to see someone: Stop using a product and seek clinical advice for persistent redness, swelling, stinging, oozing, painful scale or a recurring rash. These symptoms can reflect irritant or allergic contact dermatitis, psoriasis or another scalp condition, and no ingredient swap substitutes for identifying which.

Evidence scope: The irritation data here comes from occluded patch testing on skin, which is a deliberately provocative model and not a simulation of washing. It establishes what the molecules can do, not what a given shampoo will do to you. Individual tolerance, barrier condition and the rest of the formula all matter.